LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 535 (Mechanical Brake System - Base (Service Information)) >> Master Cylinder >> Removal

Removal

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Siphon the master cylinder.
  2. Remove the primary brake tube at the master cylinder.
  3. Remove the primary brake tube from the HCU.
  4. Remove the secondary brake tube at the master cylinder.
  5. Remove the secondary brake tube at the HCU
  6. Disconnect the brake fluid level switch from the master cylinder.
  7. Remove the 2 master cylinder mounting nuts.
  8. Remove the master cylinder.
scientia non olet · About LEMON Manuals