Section 535 (Mechanical Brake System - Base (Service Information)): Lever: Removal

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Console Rear Cover

Courtesy of DAIMLERCHRYSLER CORP.

Remove the console rear cover (2) or DVD player (if equipped).

Fig 2: Console
Courtesy of DAIMLERCHRYSLER CORP.
Remove the center console (1), (Refer to BODY/INTERIOR/FLOOR CONSOLE - REMOVAL) .
Disconnect the park brake switch wire connector.

Lock out the park brake hand lever.

Fig 3: Park Brake Lever

Courtesy of DAIMLERCHRYSLER CORP.

1 - PARK BRAKE LEVER

2 - NUT

3 - CABLE

4 - NUT

Disconnect the front cable (3) at the hand brake lever (1).
Remove the 3 hand brake lever mounting bolts.
Disconnect the wire harness routing clips to the lever.
Pull the hand lever (1) up to remove the front cable (3).