LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 535 (Mechanical Brake System - Base (Service Information)) >> Fluid >> Standard Procedure >> Brake Fluid Level

Brake Fluid Level

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Power Brake Booster/Master Cylinder
GC0026805Courtesy of DAIMLERCHRYSLER CORP.
1 - PUSH ROD
2 - BOOSTER MOUNTING STUDS
3 - POWER BRAKE BOOSTER
4 - FLUID RESERVOIR
5 - MASTER CYLINDER
6 - FLUID LEVEL SENSOR
7 - CHECK VALVE GROMMET

Always clean the master cylinder reservoir (4) and cap before checking fluid level. If not cleaned, dirt could enter the fluid.

The fluid fill level is indicated on the side of the master cylinder reservoir (4).

The correct fluid level is to the MAX indicator on the side of the reservoir. If necessary, add fluid to the proper level.