LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 535 (Mechanical Brake System - Base (Service Information)) >> Brake Lines >> Installation - Primary/Secondary Brake Tubes

Installation - Primary/Secondary Brake Tubes

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the primary or secondary brake tubes to the master cylinder.
  2. Install the primary or secondary brake tubes to the HCU.
  3. Remove the brake pedal prop rod.
  4. Fill and bleed the brake system.
scientia non olet · About LEMON Manuals