LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 535 (Mechanical Brake System - Base (Service Information)) >> Adjustable Pedal Switch >> Installation

Adjustable Pedal Switch: Installation

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Adjustable Pedal Switch
GC0026801Courtesy of DAIMLERCHRYSLER CORP.
NOTE: There are different instrument panel switch pods available based on the option content of the vehicle. Ensure the switch pod being installed matches the vehicle options.
  1. Position the lower instrument panel switch pod into the instrument panel center bezel.
  2. Install the lower instrument panel switch pod fasteners.
  3. Install the instrument panel center bezel, (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL CENTER BEZEL - INSTALLATION) .
  4. Connect the battery negative cable.
  5. Verify system operation.
scientia non olet · About LEMON Manuals