LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 534 (Suspension System (Service Information)) >> Rear >> Upper Control Arm >> Removal >> Right Side

Right Side

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. Support the rear axle.
    Fig 1: Upper Suspension Arm
    GC0026791Courtesy of DAIMLERCHRYSLER CORP.
    1 - ISOLATOR
    2 - NUT
    3 - BOLT
    4 - UPPER SUSPENSION ARM
  3. Remove the upper suspension arm nut (2) and bolt (3) from the axle bracket.
    Fig 2: Suspension Arms
    GC0026790Courtesy of DAIMLERCHRYSLER CORP.
    1 - NUT
    2 - UPPER SUSPENSION ARM
    3 - UPPER SPRING ISOLATOR
    4 - JOUNCE BUMPER RETAINER
    5 - BOLT
    6 - JOUNCE BUMPER
    7 - UPPER FLAG BOLT
    8 - LOWER FLAG BOLT
    9 - LOWER SUSPENSION ARM
  4. Remove the nut (1) and bolt (5) from the frame rail and remove the upper suspension arm (2).