LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 534 (Suspension System (Service Information)) >> Rear >> Stabilizer Link >> Removal

Stabilizer Link: Removal

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. Remove the rear tire.
  3. Support the rear axle with a jack.
  4. Remove the upper link bolt at the frame.
  5. Remove the lower link nut at the stabilizer bar.
  6. Remove stabilizer link.
scientia non olet · About LEMON Manuals