Section 534 (Suspension System (Service Information)): Rear: Spring: Removal
WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - UPPER SHOCK BOLT |
| 2 - SHOCK |
| 3 - LOWER SHOCK BOLT |
| 4 - SPRING |
- Raise and support the vehicle. Position a hydraulic jack under the axle to support the axle.
- Remove the wheel and tire assemblies.
- Remove the lower shock bolt (3) from the axle bracket.
- Remove the stabilizer bar link from the body rail.
- Lower the hydraulic jack and tilt the axle and remove the coil spring (4).
- Remove and inspect the spring isolators.