LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 534 (Suspension System (Service Information)) >> Rear >> Bushings >> Installation

Section 534 (Suspension System (Service Information)): Rear: Bushings: Installation

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the bushing to the stabilizer bar.
  2. Install the stabilizer bar bushing clamp and bolts. Tighten the bolts to 46 N.m (34 ft. lbs.).
  3. Lower the vehicle.
scientia non olet · About LEMON Manuals