Stabilizer Link: Removal
WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of DAIMLERCHRYSLER CORP.
| 1 - NUT |
| 2 - BOLT |
| 3 - STABILIZER LINK |
| 4 - OUTER TIE ROD END |
| 5 - NUT |
| 6 - BOLT |
- Raise and support the vehicle.
- Remove the tire and wheel assembly.
- Remove the upper link bolt/nut (1&2).
- Remove the lower link bolt (6).
- Remove the stabilizer link (3).