Stabilizer Link: Installation
WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - NUT |
| 2 - BOLT |
| 3 - STABILIZER LINK |
| 4 - OUTER TIE ROD END |
| 5 - NUT |
| 6 - BOLT |
- Install the stabilizer link (3) to the vehicle.
- Install the lower link bolt (6) and tighten to 115 N.m (85 ft. lbs.)
- Install the upper link bolt/nut (1&2) and tighten to 135 N.m (100 ft. lbs.).
- Install the tire and wheel assembly.
- lower the vehicle.