Stabilizer Bar: Removal

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Stabilizer Link

Courtesy of DAIMLERCHRYSLER CORP.

1 - NUT

2 - BOLT

3 - STABILIZER LINK

4 - OUTER TIE ROD END

5 - NUT

6 - BOLT

Raise and support the vehicle.
Remove the front splash shield.

Remove the stabilizer bar link upper nut (1) & bolt (2).

Fig 2: Stabilizer Bar Bracket To Frame

Courtesy of DAIMLERCHRYSLER CORP.

1 - STABILIZER BAR

2 - RETAINER BRACKET

3 - BUSHING

Remove the two stabilizer bushing clamp bolts (2).
Remove the stabilizer bar (1).