LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 534 (Suspension System (Service Information)) >> Front >> Shock >> Removal >> Left Front

Left Front

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: PDC
GC0026780Courtesy of DAIMLERCHRYSLER CORP.
1 - POWER DISTRIBUTION CENTER
2 - BATTERY
  1. Remove the air box cover and air intake hose.
  2. Remove the 3 PDC bracket nuts (1).
    Fig 2: Upper Bolts
    GC0026779Courtesy of DAIMLERCHRYSLER CORP.
    1 - PDC
    2 - UPPER MOUNTING NUTS
  3. Move the PDC (1) off to the side to access the four upper shock mount nuts (2).
  4. Remove the four upper shock mount nuts (2).
  5. Raise and support the vehicle.
  6. Remove the tire.
  7. Remove the two brake caliper adapter bolts.
  8. Support the brake caliper adaptor and caliper. Do not allow the caliper to hang by the brake hose. 
  9. Remove the disc brake rotor.
    Fig 3: Upper Ball Joint Separation
    GC0026769Courtesy of DAIMLERCHRYSLER CORP.
    1 - SPECIAL TOOL 8677
    2 - UPPER BALL JOINT
    3 - KNUCKLE
  10. Remove the upper ball joint nut.
  11. Separate the upper ball joint (2) from the knuckle (3) using special tool 8677 (1).
    Fig 4: Suspension Lowered
    GC0026770Courtesy of DAIMLERCHRYSLER CORP.
    1 - KNUCKLE
    2 - CLEVIS BRACKET AND BUSHING
    3 - STABILIZER LINK
  12. Remove the lower clevis bolt (2) at the lower control arm.
  13. Remove the lower stabilizer bolt (3) at the lower control arm.
    Fig 5: Shock Mount Upper
    GC0026776Courtesy of DAIMLERCHRYSLER CORP.
    1 - UPPER CONTROL ARM
    2 - MOUNTING HOLES
    3 - SHOCK ASSEMBLY
    4 - CLEVIS BRACKET
  14. Remove the shock (3) from the vehicle.
  15. Remove the spring if necessary (Refer to SUSPENSION/FRONT/SPRING - REMOVAL) .