LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 534 (Suspension System (Service Information)) >> Front >> Lower Control Arm >> Removal

Lower Control Arm: Removal

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. Remove the tire and wheel assembly.
    Fig 1: Knuckle Separated
    GC0026767Courtesy of DAIMLERCHRYSLER CORP.
    1 - UPPER CONTROL ARM
    2 - UPPER BALL JOINT
    3 - KNUCKLE
    4 - UPPER BALL JOINT NUT
  3. Remove the steering knuckle (3). (Refer to SUSPENSION/FRONT/KNUCKLE - REMOVAL) .
    Fig 2: Suspension Lowered
    GC0026770Courtesy of DAIMLERCHRYSLER CORP.
    1 - KNUCKLE
    2 - CLEVIS BRACKET AND BUSHING
    3 - STABILIZER LINK
  4. Remove the shock clevis bracket (2) from the lower control arm.
    Fig 3: Lower Control Arm Rear Bolts
    GC0026775Courtesy of DAIMLERCHRYSLER CORP.
    1 - LOWER CONTROL ARM
    2 - BOLTS
  5. Remove the nut and bolt from the front of the lower control arm.
  6. Remove the rear bolts and flag nuts from the lower control arm.
  7. Remove the lower control arm from the vehicle.
scientia non olet · About LEMON Manuals