Stabilizer Bar To Frame Bushing
WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of DAIMLERCHRYSLER CORP.
| 1 - STABILIZER BAR |
| 2 - RETAINER BRACKET |
| 3 - BUSHING |
- Install the stabilizer bar bushing (3) to the bar (1).
- Install the stabilizer bar bushing retainer bracket (2) bolts and tighten the two mounting bolts.
- Install the front splash shield.
- Lower the vehicle.