Hard Wired Inputs
WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
The hard wired inputs to the EMIC include the following:
- BCM Wake Up Input
- Fused B(+) - Ignition-Off Draw
- Fused Ignition Switch Output (Run-Start)
- Fused Park Lamp Relay Output
- Left Turn Signal
- Low Coolant Fluid Level Sense - with Diesel Engine
- Low Washer Fluid Sense
- Park Brake Switch Sense
- Red Brake Warning Indicator Driver
- Right Turn Signal
- VTSS Indicator Driver
Refer to the appropriate wiring information in ELECTRICAL for additional details.