LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 530 (Heated Glass) >> Rear Window Defogger Relay >> Installation

Rear Window Defogger Relay: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to the fuse and relay layout map on the inside of the junction block (JB) cover for EBL relay location.
  1. Position the EBL relay into the proper receptacle of the JB.
  2. Align the EBL relay terminals with the terminal cavities in the JB receptacle and push down firmly on the relay until the terminals are fully seated.
  3. Install the cover onto the JB.
  4. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals