LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 529 (Seat Heating System) >> Driver Heated Seat Switch >> Removal

Driver Heated Seat Switch: Removal

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable.
  2. Remove the appropriate seat cushion side shield (Refer to SEAT CUSHION COVER - FRONT ).
  3. Disconnect the heated seat switch electrical connector. Depress the locking tab and pull straight apart.
  4. Working from the underside of the switch, gently rock the switch back and forth out of its mounting location.
scientia non olet · About LEMON Manuals