LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 529 (Seat Heating System) >> Driver Heated Seat Switch >> Installation

Driver Heated Seat Switch: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Gently rock the switch back and forth in to its mounting location.
  2. Connect the heated seat switch electrical connector.
  3. Install the appropriate seat cushion side shield. Refer to INTERIOR/EXTERIOR for the procedure.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals