LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 525 (Ignition Control) >> Ignition Coil >> Installation >> 2.4L

Ignition Coil: Installation: 2.4L

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position coil to engine.
  2. Install 4 mounting bolts. Refer to TORQUE - IGNITION SYSTEM  .
  3. Install secondary cables.
  4. Install electrical connector at rear of coil.
  5. Install air cleaner tube and housing.
scientia non olet · About LEMON Manuals