LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 525 (Ignition Control) >> Ignition Coil Capacitor >> Removal

Ignition Coil Capacitor: Removal

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

The coil capacitor is located in the engine compartment and is attached (clipped) to a wiring harness trough near the brake power booster (graphic not available).

  1. Unclip capacitor from wiring harness trough.
  2. Disconnect electrical connector at capacitor.
scientia non olet · About LEMON Manuals