LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 524 (Starting System) >> Starter Motor >> Installation >> 2.4L 4-Cylinder

2.4L 4-Cylinder

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position starter into bellhousing and install 2 bolts. Refer to SPECIFICATIONS  .
  2. Install battery cable and nut to stud on starter solenoid. Refer to SPECIFICATIONS  .
  3. Install solenoid wire connector to solenoid terminal.
  4. Lower vehicle.
  5. Connect negative battery cable.
scientia non olet · About LEMON Manuals