LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 523 (Wiring Diagram Information) >> Wiring Diagram Information >> Standard Procedure >> Standard Procedure - Testing For A Short To Ground

Standard Procedure - Testing For A Short To Ground

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuse and disconnect all items involved with the fuse.
  2. Connect a test light or a voltmeter across the terminals of the fuse.
  3. Starting at the fuse block, wiggle the wiring harness about six to eight inches apart and watch the voltmeter/test lamp.
  4. If the voltmeter registers voltage or the test lamp glows, there is a short to ground in that general area of the wiring harness.
scientia non olet · About LEMON Manuals