LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 521 (Audio System & Video System) >> Speaker >> Installation >> Instrument Panel

Instrument Panel

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect wire harness connector and install speaker.
  2. Install speaker mounting screws. Tighten to 2 N.m (20 in. lbs.).
  3. Install instrument panel top cover (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL TOP COVER - INSTALLATION) .
  4. Install the A-pillar trim (Refer to BODY/INTERIOR/A-PILLAR TRIM - INSTALLATION) .
  5. Connect the battery negative cable.
scientia non olet · About LEMON Manuals