LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 521 (Audio System & Video System) >> Antenna Body & Cable >> Diagnosis And Testing >> Diagnosis And Testing - Antenna Body And Cable >> Test 1

Test 1

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

Test 1 determines if the antenna mast is insulated from ground. Proceed as follows:

  1. Disconnect and isolate the antenna coaxial cable connector behind the right side kick panel.
  2. Touch one ohmmeter test lead to the tip of the antenna mast. Touch the other test lead to known ground. Check the ohmmeter reading for continuity.
  3. There should be no continuity. If OK, go to Test 2. If not OK, replace the faulty antenna body and cable.