LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 520 (Fuel System) >> Fuel Injection - 2.8L Diesel >> Fuel Pressure Sensor >> Removal

Fuel Pressure Sensor: Removal

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable.
  2. Remove engine cover (Refer to ENGINE COVER - REMOVAL) , (Refer to ENGINE COVER - REMOVAL) or (Refer to ENGINE COVER - REMOVAL) .
  3. Disconnect fuel pressure sensor electrical connector. See Figure.
  4. Remove fuel pressure sensor from fuel rail. See Figure.
scientia non olet · About LEMON Manuals