Camshaft Position Sensor: Installation
WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of DAIMLERCHRYSLER CORP.
| 1 - CAMSHAFT POSITION SENSOR |
| 2 - INTAKE AIR PRESSURE/BOOST PRESSURE SENSOR |
- Install camshaft position sensor and tighten bolt to 10.8 N.m (95 in lbs.). See Fig 1.
- Reconnect electrical connector. See Fig 1.
- Install engine cover.
- Reconnect negative battery cable.