Accelerator Pedal Position Sensor: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: ACCELERATOR PEDAL POSITION SENSOR

Courtesy of DAIMLERCHRYSLER CORP.

1 - BRAKE PEDAL

2 - APP SENSOR

Position the APP sensor and install the fasteners hand tight. See Fig 1.

Tighten the APP sensor fasteners to 10.8N.m (96 in. lbs.).
Connect the APP sensor wiring harness connector.
Connect negative battery cable.