LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 520 (Fuel System) >> Fuel Injection - 2.4L/3.7L Gas >> Fuel Pump Relay >> Installation

Fuel Pump Relay: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

The fuel pump relay is located in the Power Distribution Center (PDC). Refer to label on PDC cover for relay location.

  1. Install relay to PDC.
  2. Install cover to PDC.