LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 516 (Lighting Systems - Exterior) >> Multi-Function Switch >> Description >> Right Control Stalk

Right Control Stalk

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

The right (wiper) control stalk of the multi-function switch supports the following functions and features:

  1. Continuous Front Wipe Modes  - The right multi-function switch control knob provides two continuous front wipe switch positions, low speed or high speed.
  2. Continuous Rear Wipe Mode  - The right multi-function switch control ring provides one continuous rear wipe switch position.
  3. Front Washer Mode  - The right multi-function switch control stalk provides front washer system operation.
  4. Front Wipe-After-Wash Mode  - The right multi-function switch control stalk provides a wipe-after-wash mode.
  5. Front Wiper Mist Mode  - The right multi-function switch control stalk provides a front wiper system mist mode.
  6. Intermittent Front Wipe Mode  - The right multi-function switch control knob provides an intermittent front wipe mode with five delay interval positions.
  7. Intermittent Rear Wipe Mode  - The right multi-function switch control ring provides one fixed interval intermittent rear wipe mode switch position.
  8. Rear Washer Mode  - The right multi-function switch control ring provides rear washer system operation.