Left Control Stalk

The left (lighting) control stalk of the multi-function switch supports the following functions and features:

• Front Fog Lamps  - For vehicles so equipped, the left multi-function switch control knob provides detent switching for the optional front fog lamps.
• Headlamps  - The left multi-function switch control knob provides detent switching for the headlamps.
• Headlamp Beam Selection  - The left multi-function switch control stalk provides detent switching for selection of the headlamp high or low beams.
• Headlamp Optical Horn  - The left multi-function switch control stalk includes momentary switching of the headlamp high beam circuits to provide an optical horn feature (sometimes referred to as flash-to-pass), which allows the vehicle operator to momentarily flash the headlamp high beams as an optical signalling device.
• Interior Lamps Defeat  - The left multi-function switch control ring provides detent switching to defeat the illumination of all interior courtesy lamps when a door, the rear flip-up glass, or the tailgate are opened.
• Interior Lamps On  - The left multi-function switch control ring provides detent switching to simultaneously illuminate all interior courtesy lamps.
• Panel Lamps Dimming  - The left multi-function switch control ring provides simultaneous adjustable control of the illumination intensity of all instrument panel lighting at one of six available illumination intensity levels.
• Parade Mode  - The left multi-function switch control ring provides detent switching for a parade mode that maximizes the illumination intensity of all instrument panel lighting for visibility when driving in daylight with the exterior lamps turned on.
• Park Lamps  - The left multi-function switch control knob provides detent switching for the park lamps.
• Rear Fog Lamps  - For vehicles so equipped, the left multi-function switch control knob provides detent switching for the optional rear fog lamps. Rear fog lamps are optional only for vehicles manufactured for certain markets, where they are required.
• Turn Signal Control  - The left multi-function switch control stalk provides both momentary non-detent switching and detent switching with automatic cancellation for both the left and right turn signal lamps.