Park Lamps
WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
| CONDITION | POSSIBLE CAUSES | CORRECTION |
|---|---|---|
| ONE OR SEVERAL, BUT NOT ALL LAMPS IN PARK LAMP CIRCUIT DO NOT ILLUMINATE | 1. Faulty or missing fuse. | 1. Test and replace park lamp fuse as required. |
| 2. Faulty or missing bulb. | 2. Test and replace park lamp bulb as required. | |
| 3. Faulty ground circuit. | 3. Test and repair open park lamp ground circuit as required. | |
| 4. Faulty supply circuit. | 4. Test and repair open park lamp relay output circuit as required. | |
| NO PARK LAMPS ILLUMINATE | 1. Faulty or missing relay. | 1. Test and replace park lamp relay as required. |
| 2. Faulty control circuit. | 2. Test and repair open park lamp relay control circuit as required. | |
| 3. Faulty switch. | 3. Test and replace multi-function switch as required. | |
| 4. Faulty BCM inputs or outputs. | 4. Use a diagnostic scan tool to test the BCM inputs and outputs. Refer to BODY DIAGNOSTIC PROCEDURES . | |
| PARK LAMPS DO NOT EXTINGUISH | 1. Faulty supply circuit. | 1. Test and repair shorted park lamp relay output circuit as required. |
| 2. Faulty control circuit. | 2. Test and repair shorted park lamp relay control circuit as required. | |
| 3. Faulty relay. | 3. Test and replace park lamp relay as required. | |
| 4. Faulty switch. | 4. Test and replace multi-function switch as required. | |
| 5. Faulty BCM inputs or outputs. | 5. Use a diagnostic scan tool to test the BCM inputs and outputs. Refer to BODY DIAGNOSTIC PROCEDURES . |