Lamp - Fascia Mounted
WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the battery negative cable.
- Remove the grille panel from the front of the grille opening reinforcement. (Refer to BODY/EXTERIOR/GRILLE - REMOVAL) .
- Disconnect the front fog lamp pigtail wire from the connector on the grille opening reinforcement.
- Remove the screw from the mounting bracket that secures the fog lamp to the bracket on the top of the front bumper fascia. See Fig 1.
1 - SCREW 2 - LAMP - Remove the lamp from the top of the fascia.