Fog Lamp Adjustment

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

A properly aligned front fog lamp will project a pattern on the alignment screen 100 millimeters (4 inches) below the fog lamp centerline and straight ahead of the lamp.

NOTE: On vehicles with grille-mounted fog lamps the grille must be removed to access the front fog lamp adjusting screws. (Refer to BODY/EXTERIOR/GRILLE - REMOVAL) .

Turn the front fog lamp adjusting screws to adjust the beam height as required. See Fig 1 or Fig 2.

Fig 1: Front Fog Lamp Adjusting Screw - Grille-Mounted

Courtesy of DAIMLERCHRYSLER CORP.

1 - FRONT FOG LAMP

2 - ADJUSTING SCREW

Fig 2: Front Fog Lamp Adjusting Screw - Fascia-Mounted

Courtesy of DAIMLERCHRYSLER CORP.

1 - FRONT FOG LAMP

2 - ADJUSTING SCREW

3 - FRONT BUMPER FASCIA