Transmission Range Sensor: Removal
WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - SEAL |
| 2 - MANUAL SHAFT |
- Remove valve body assembly from vehicle.(Refer to TRANSMISSION/AUTOMATIC - 42RLE/VALVE BODY - REMOVAL)
- Remove the manual shaft seal (1). See Fig 1.
1 - SCREW 2 - TRS - Remove manual shaft/TRS retaining screw (1). See Fig 2.
- Slide TRS off of manual valve shaft.