LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 510 (Tires & Wheels) >> Transponder >> Removal >> Front Transponder

Front Transponder

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front Transponder
GC0025729Courtesy of DAIMLERCHRYSLER CORP.
1 - NUTS
2 - TRANSPONDER
3 - ELECTRICAL CONNECTOR
  1. Raise and support the vehicle.
  2. Remove the front part wheel well housing cover and pull it back toward the tire to gain access to the transponder.
  3. Remove the mounting nuts (1) for the transponder (2) from the mounting bracket. See Fig 1.
  4. Disconnect the electrical connector (3) and remove the transponder (2) from the vehicle. See Fig 1.
scientia non olet · About LEMON Manuals