Rear Transponder

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Mounting Nuts

Courtesy of DAIMLERCHRYSLER CORP.

1 - TRANSPONDER

2 - NUTS

3 - BRACKET

Install the transponder (1) to the bracket (3) and install the mounting nuts (2). See Fig 1.

Fig 2: Rear Transponder

Courtesy of DAIMLERCHRYSLER CORP.

1 - BRACKET

2 - RIVETS

3 - TRANSPONDER

4 - ELECTRICAL CONNECTOR

5 - MOUNTING NUT

Reconnect the electrical connector (4) to the transponder (3). See Fig 2.
Install the transponder/bracket assembly (1) to the vehicle and install new rivets (2). See Fig 2.
Lower the vehicle.