Front Transponder
WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of DAIMLERCHRYSLER CORP.
| 1 - NUTS |
| 2 - TRANSPONDER |
| 3 - ELECTRICAL CONNECTOR |
- Reconnect the electrical connector (3) to the transponder (2). See Fig 1
- Install the transponder (2) to the mounting bracket and install the mounting nuts (1). See Fig 1.
- Install the front part of the wheel well housing cover.
- Lower the vehicle.