LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 510 (Tires & Wheels) >> Spare Tire Carrier >> Installation

Spare Tire Carrier: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the spare tire onto the studs on the carrier.
  2. Install the two lug nuts and one wheel lock (if equipped). Tighten the nuts to 115 N.m (85 ft.lbs.)
  3. Close the plastic wheel cover and install the two mounting bolts. Tighten the nuts to 115 N.m (85 ft.lbs.) (Cherokee model)
  4. Close the license plate to cover the bolts and latch. (Cherokee model)
scientia non olet · About LEMON Manuals