LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 509 (Suspension System) >> Rear >> Stabilizer Bar >> Removal

Stabilizer Bar: Removal

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. Remove the stabilizer bar bolts from the lower suspension arm. See Fig 1.
  3. Remove the stabilizer bar.
Fig 1: Rear Stabilizer Bar
GC0025572Courtesy of DAIMLERCHRYSLER CORP.
1 - MOUNTING HOLES
2 - STABILIZER BAR