LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 509 (Suspension System) >> Front >> Upper Control Arm >> Removal >> Removal - Right Side

Removal - Right Side

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. Remove the right side tire and wheel assembly.
  3. Remove the upper ball joint nut.
  4. Separate the upper ball joint from the steering knuckle using tool C-4150A.
  5. Lower the vehicle.
  6. Remove the air box (Refer to ENGINE/AIR INTAKE SYSTEM/AIR CLEANER ELEMENT - REMOVAL) .
  7. Remove the cruise control servo mounting nuts.
  8. Remove the upper control arm rear bolt.
  9. Remove the upper control arm front bolt.
  10. Remove the upper control arm from the vehicle.
scientia non olet · About LEMON Manuals