Stabilizer Bar: Removal

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle.
Remove the tire and wheel assembly.
Remove the upper stabilizer link bolts at the stabilizer bar.
Remove the stabilizer bar bushing clamps from the frame. See Fig 1.
Remove the stabilizer bar from the vehicle.

Fig 1: Sway Bar

Courtesy of DAIMLERCHRYSLER CORP.

1 - SWAY BAR

2 - SWAY BAR BUSHINGS