LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 509 (Suspension System) >> Front >> Bushings >> Installation >> Installation - Stabilizer Bar Bushings

Installation - Stabilizer Bar Bushings

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the stabilizer bushings to the stabilizer bar.
  2. Install the stabilizer bushing clamps. Tighten the nuts to 149 N.m (110 ft.lbs.).
  3. Lower the vehicle.
scientia non olet · About LEMON Manuals