LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 508 (Frames & Bumpers) >> Rear CROSSMEMBER >> Installation

Rear CROSSMEMBER: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the crossmember and install the bolts.
  2. Tighten the bolts to 47 N.m (35 ft. lbs.)
  3. Install transmission mount through bolt and tighten to 88 N.m (65 ft. lbs.).
scientia non olet · About LEMON Manuals