LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 508 (Frames & Bumpers) >> Fuel Tank Skid Plate >> Installation

Fuel Tank Skid Plate: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the skid plate and support with a suitable lifting device.
  2. Install the trailer hitch, if equipped. (Refer to FRAME & BUMPERS/FRAME/TRAILER HITCH - INSTALLATION) 
  3. Install the tow hooks, if equipped. (Refer to FRAME & BUMPERS/FRAME/REAR TOW HOOK - INSTALLATION) 
  4. Install the bolts and tighten to 88 N.m (65 ft. lbs.).
scientia non olet · About LEMON Manuals