Section 506 (Rack & Pinion Power Steering System): Pump: Reservoir: Removal: 3.7L

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Fluid Reservoir

Courtesy of DAIMLERCHRYSLER CORP.

1 - FLUID RESERVOIR

2 - RETAINING CLIP

3 - PULLEY

4 - PUMP BODY

Remove the power steering pump. (Refer to STEERING/PUMP - REMOVAL) .
Secure the pump in a holding fixture.
Remove the retaining clips (2) by prying the lock tab upwards and tap the retaining clips (2) off the pump body (4). See Fig 1
Remove the reservoir (1) from the pump body (4).