Section 506 (Rack & Pinion Power Steering System): Pump: Pulley: Removal: Diesel
WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the engine cooling fan.
- Remove the fan shroud.
- Remove the serpentine drive belt.
- Remove the three bolts securing the pulley to the pump. See Fig 1.
| 1 - HIGH PRESSURE HOSE |
| 2 - POWER STEERING PUMP |
| 3 - POWER STEERING PUMP MOUNTING BOLT |
| 4 - POWER STEERING PUMP PULLEY |
| 5 - POWER STEERING PUMP PULLEY MOUNTING BOLTS |