LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 506 (Rack & Pinion Power Steering System) >> Pump >> Fluid Cooler >> Removal

Fluid Cooler: Removal

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Fluid Cooler
GC0025256Courtesy of DAIMLERCHRYSLER CORP.
1 - FLUID COOLER
2 - MOUNTING BOLTS
  1. Remove the return line at the gear.
  2. Remove the return line at the reservoir.
  3. Remove the grille (Refer to BODY/EXTERIOR/GRILLE - REMOVAL) .
  4. Remove the two cooler mounting bolts (2). See Fig 1
  5. Remove the cooler (1) from the vehicle.
scientia non olet · About LEMON Manuals