LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Body - Interior & Exterior) >> Weatherstrip/Seals >> Swing Gate Opening Weatherstrip >> Removal

Swing Gate Opening Weatherstrip: Removal

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the swing gate and using a trim stick C-4755 or equivalent, remove the swing gate lower sill plate.
  2. Peal seal off of the gate opening flange.
scientia non olet · About LEMON Manuals