LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Body - Interior & Exterior) >> Weatherstrip/Seals >> Swing Gate BELTLINE Weatherstrip >> Installation

Swing Gate BELTLINE Weatherstrip: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the seal over the swing gate flange and seat the corner tabs.
  2. Install the swing gate trim panel. (Refer to BODY/SWING GATE/TRIM PANEL - INSTALLATION) .